Challenge MS-10 Multiple-Spindle Drill

Categories: , , Tags: ,

Description

High production and heavy-duty drilling of up to 10 holes in a single stroke makes the MS-10 the ultimate drilling machine.

– High Production Multi-Hole Drilling
– Drills Up To 10 Holes in One Stroke
– Maximum Drill Bit Diameter 1/2″
– 2-1/2″ Drilling Capacity
– Powerful Hydraulic Operation
– Easy Head Adjustment
– Variable Speed Stroke Control
– Automatic Paper Chip Removal
– Rugged Cast Iron Construction
– Flexible Side Guide Adjustments
– Multi-Splined Drive Shaft
– Backgauge Adjustments
– Lighted Work Surface

Features

– High Production Multi-Hole Drilling
– Drills Up To 10 Holes in One Stroke
– Maximum Drill Bit Diameter 1/2″
– 2-1/2″ Drilling Capacity
– Powerful Hydraulic Operation
– Easy Head Adjustment
– Variable Speed Stroke Control
– Automatic Paper Chip Removal
– Rugged Cast Iron Construction
– Flexible Side Guide Adjustments
– Multi-Splined Drive Shaft
– Backgauge Adjustments
– Lighted Work Surface

Specs

Maximum Number of Drill Heads 10 Heads
Drill Sizes Available** (2″ capacity) 1/8″ to 1/2″ / 3 to 13 mm
Drill Sizes Available (2-1/2″ capacity) 1/4″ to 1/2″ / 6 to 13 mm
Center to Center Distance Maximum 21″ / 53 cm
Center to Center Distance Minimum*** 1-1/4″ / 3.2 cm
Minimum Distance Between Holes w/ Adj. Stops 3/8″ / 9.5 cm
Minimum Distance Between Holes w/ Fixed Gauges 1/4″ / 6 mm
Maximum Drilling Capacity 2-1/2″ / 6.35 cm
Strokes per Minute (adjustable) 18 to 26
Backgauge Adjustment 0 to 9″ / 0 to 23 cm
Vertical Adjustment of Individual Heads 1/4″ / 6 mm
DIMENSIONS
Table Size 24″ x 36″ / 61 x 91 cm
Table Height 38″ / 96.5 cm
Overall Height 60″ / 152 cm
Floor Space Needed 35″ x 40″ / 89 x 102 cm
Net Weight (approximate) 1350 lbs / 675 kg
Shipping Weight (approximate) 1660 lbs / 830 kg
ELECTRICAL
Standard -3 Phase, 60 Hz, AC.   Pump: 3/4 HP.  Spindle Motor: 3 HP.
208 Volts, 14 Amps (service size 20 Amps) or
230 Volts, 12.8 Amps (service size 20 Amps) or
460 Volts, 6.6 Amps (service size 15 Amps)
Optional -1 Phase, 60 Hz, AC.   Pump: 3/4 HP.  Spindle Motor: 3 HP
208 Volts, 26.5 Amps (service size 40 Amps) or
230 Volts, 24.2 Amps (service size 40 Amps)

** Special large hole drilling (up to 1-3/4″ in diameter) is possible with a conversion kit.
*** Three-hole drilling heads are available for drilling 3 holes in 1″ centers.
Challenge reserves the right to make changes to any product or specification without notice and without incurring responsibility to existing units.

Additional Resources

Product Literature:

Product Literature:
(click filename to view, right click & “save target as” to download)		 MS-10.pdf
Operator, Technical, & Parts Manuals: Product Manual Search Page
Electrical Installation Specifications Electrical_Install_Specs.pdf

 

Reviews

There are no reviews yet.

Be the first to review “Challenge MS-10 Multiple-Spindle Drill”

Your email address will not be published. Required fields are marked *

Related Products